A crossmember is a structural section, usually of steel, usually boxed, that is bolted or welded across the frame rails of a vehicle, to support the vehicles motor. For the suspension of any vehicle to operate as it should, for proper handling, and to keep the body panels in alignment, the frame has to be strong enough to handle the loads applied to it. It must not deflect, and it has to have enough torsional strength to resist twisting.
PhotoModel "A" Ford Superide IFS Kit
Independent Front Suspension gives you twice the ride of a new dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped via Fed Ex, our SUPERIDE arrives complete hub to hub with no other parts to buy.
Please click here to build your complete kit
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
32 Ford Superide IFS Kit
Independent Front Suspension gives you twice the ride of a new dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped by Fed Ex, our SUPERIDE arrives complete hub to hub with no other parts to buy.
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1933-1934 Ford Mustang II Crossmember with Shock hats. Our Mustang IFS kits for Fords are natural conversions for the Ford frames. We retain all the factory dimensions and locations, so you get all the benefit of Ford engineering in your front end.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1933-1934 Ford Superide IFS Kit
Independent Front Suspension gives you twice the ride of a new dropped axle at a comparable cost. It adds more cash value to your car than any other type of suspension. With HEIDTS engineering you get an unmatched, correct, safe ride. HEIDTS SUPERIDE complete system is perfect for the ultimate stance! Shipped via Fed Ex, our SUPERIDE arrives complete hub to hub with no other parts to buy.
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1934-1935 Chevy Standard Mustang II Crossmember With Shock Hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1934-1936 Chevy Master Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1935-1940 Ford Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1935-1940 Ford Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place.
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1937-1939 Chevy Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1937-1939 Chevy Pick-up Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1937-1939 Chevy Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1937-1941 Willys Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1940-1946 Chevy Pick-up Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1940-1946 Chevy Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place
To build your complete kit, please click here.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1940-1948 Chevy Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1940-1948 Chevy Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1941-1948 Ford Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1941-1948 Ford Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1947-1954 Chevy Pick-Up Superide II IFS Kit
Our SUPERIDE II IFS System uses a Mustang II spindle to allow for a front mount rack & pinion unit, this allows for easy engine installation. The upper control arms use threaded adjusters for the wheel alignment. These threaded adjusters, unlike eccentric adjusters, will never slip out of place
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1948-1952 Ford Pick-Up Superide II IFS Kit
Our SUPERIDE II IFS System is the ultimate front suspension system. Enjoy driving with the smooth ride and good handling of independent suspension, and add to the value of your classic truck with a HEIDTS independent suspension system, the most popular suspension system in use today. Why? Because they are engineered right to work right!
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1948-1952 Ford Pick-up Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1948-1952 Ford Pickup complete Mustang II IFS kit. Included are a 3 piece weld in crossmember with upper spring hats already notched for your frame once you install the boxing plates, tubular upper and lower control arms, 11" brakes with GM metric calipers, stock or 2" drop spindles, manual rack and pinion, and standard shocks and springs. Everything you need to give you independent suspension.
To build your complete suspension kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1949-1954 Chevy car Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1953-1956 Ford Pick-up Mustang II Crossmember With Shock Hats. Our Mustang IFS kits for Fords are natural conversions for the Ford frames. We retain all the factory dimensions and locations, so you get all the benefit of Ford engineering in your front end.
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Classic Truck Superide II 1953-1956 Ford Pick-Up Superide II IFS Kit
Our SUPERIDE II IFS System is the ultimate front suspension system. Enjoy driving with the smooth ride and good handling of independent suspension, and add to the value of your classic truck with a HEIDTS independent suspension system, the most popular suspension system in use today. Why? Because they are engineered right to work right!
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1955-1959 Chevy Pick-up Mustang II Crossmember with Shock hats
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1955-1959 Chevy Pick-Up Superide II IFS Kit
Our SUPERIDE II IFS System is the ultimate front suspension system. Enjoy driving with the smooth ride and good handling of independent suspension, and add to the value of your classic truck with a HEIDTS independent suspension system, the most popular suspension system in use today. Why? Because they are engineered right to work right!
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
1960-1965 Falcon Mustang II Crossmember Package. These crossmembers are individually designed for the 1960-1965 Falcon. They include full front section boxing plates that weld into place. The correct geometry and anti-dive is all designed in for superior handling and ease of operation. Heidts 2" dropped spindles are recommended to retain stock ride height.
To build your complete kit, please click here
WARNING: This product can expose you to chemicals including nickel and urethane, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
